| The SK120 will compact EPS at a ratio of 50:1 & will produce a block in density of approx 300kg/m3
Installation of our equipment will provide the following benefits:
- EPS volumes leaving site will be reduced by an average ratio of 50:1
- 2. Site tidiness and hygiene will be easier to maintain, and wind scatter of waste will be eliminated.
- 3. The SK120 will greatly reduce the risk of fire, vandalism and vermin infestation
- 4. A SK120 installed on a medium/high EPS waste producing site will produce cost savings, short pay back periods (dependent on waste volume) & product revenue.
- By reducing waste volumes leaving site, a positive contribution is made to the protection of our environment. Fewer vehicle movements’ result in less pollution reduced congestion, less road damage and reduced disruption on site.
- By segregating & compacting waste EPS from general waste streams, a marked reduction in volume will be achieved & therefore, a significant reduction in overall waste disposal costs.
|
 |
Screw compactor Type SK 120 for EPS
Production capacity: EPS 18 kg* per hour approximately
*The productive capacity of RUNI SK 120 depends on how dry the EPS is, and what shape it has
| Energy consumption: Motor: |
1,5 kW |
| |
|
|
| Dimensions: |
Length: |
2.95 meter |
| |
Width: |
0.50 meter |
| |
Height: |
1.75 meter w/open lid |
| |
In feed opening: |
320 x 750 mm |
| |
Weight: |
300 Kilos |
| |
|
|
| |
|
| |
|
| PLEASE NOTE |
A three phase 16-amp power supply will be required, terminating in an isolator within 3 metres of the equipment. Any additional visits due to incomplete supply will be charged at the standard rate |
|
